中文 / English
DJI innovations - NAZA
Created by dji innovations
NAZA is a lightweight multi-axis control platform specially designed for aeromodel hobbyists. It is a smalled all-in-one module includes controller, gyroscope, accelerometer and barometer. It has D-Bus support, upgrade support, and extendible port.

Different from WKM for heavy payloads and aerophotography, NAZA not only inherits outstanding flight stability of DJI products, but also provides excellent maneuverability, which gives hobbyists wonderful flight experience.
WK-M
features
  • All-in-One design

    All-in-One design

    All-in-One Design integrates inner damping, controller, gyroscope, accelerometer and barometer, which simplifies installation and saves space.

  • Advanced attitude stabilization algorithm

    Advanced attitude stabilization algorithm

    Advanced mix guidance algorithm and control algorithm, inherits outstanding flight stability of DJI products, provides excellent maneuverability, gives hobbyists wonderful flight experience.

  • Low voltage protection

    Low voltage protection

    Two-level low voltage protection. low voltage LED alarm, and automatic landing.

  • D-BUS

    D-BUS

    D-Bus supports S-BUS receiver system

  • 2-axis Gimbal Stabilization

    2-axis Gimbal Stabilization

    The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the helicopter after setting the parameters the first time.

  • Upgradeable and extendible

    Upgradeable and extendible

    Easy firmware upgrade, extendible port for future use is available.

gallery
specifications
General
Built-In Functions Autopilot
Auto Level Fail-safe
Low Voltage Protection
S-Bus Receiver Support
2-axle Gimbal Support
Peripheral
Supported Multi-rotor Quad-rotor I, X;
Hex-rotor I, V.
Supported ESC output 400Hz refresh frequency.
Recommended Transmitter PCM or 2.4GHz with minimum 4 channels.
Assistant Software System Requirement Windows XP SP3 / Windows 7

Electrical &Mechanical
Working Voltage Range MC:4.8V~5.5V
  VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo)
Power Consumption MAX1. 5W (0.3A@5V)
Normal:0.6W (0.12A@5V)
Operating Temperature -10°C ~ 50°C
Weight MC:25g
  VU:20g
Dimensions MC: 45.5mm x 31.5mm x 18.5mm
VU: 32.2mm x 21.1mm x 7.7mm
Flight Performance
(can be effected by mechanical performance and payloads)
Max Yaw Angular Velocity 190° / s
Max Tilt Angle 45°
Ascent / Descent ±6m/s


videos    
download
Newest
Assistant Software (V1.2)
Date: 2012.02.03 Download
Firmware(V1.04)
Date: 2012.02.03
User Manual(V1.4)
Date: 2012.02.03 Download
Last Version
Assistant Software (V1.1)
Date: 2011.12.28 Download
Firmware(V1.02)
Date: 2011.12.28
User Manual(V1.3)
Date: 2011.12.28 Download
Important notes:
After firmware upgrade, please re-configure by Assistant software，and make sure throttle is operating correctly after firmware upgrade. 1) do not install props until you are sure the motors are running in the correct rotation, 2) make sure the motor response to throttle stick command.
Release note
NAZA Multi-Rotor Release - 2012.02.03
Drivers
NAZA Multi-Rotor Driver 32 & 64 Bit 1.0 2011.12.6
Other
NAZA Multi-Rotor Quick Start 1.0 2011.12.8
Relational Products
SPECIFICATIONS OF F450
Model Flame Wheel 450 (F450)
Frame Weight 282g
Diagonal Wheelbase 450mm
Takeoff Weight 800g ~ 1600g
FlameWheel450 is a multi-rotor designed for all pilots for fun or AP. With DJI WKM or NAZA autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.
  Pictures

  • Motor
    Motor

    Stator size: 22x12mm
    KV: 920 rpm/V

  • ESC
    ESC

    Current: 30A OPTO
    Signal Frequency: 30Hz - 450Hz
    Battery: 3S ~ 4S LiPo

  • Propeller
    Blade

    Adopt PC/ABS ultrastrength material design,fine surface hardness ,anti-impact.
    Dimensions: 10 x 4.5 in; 8 x 4.5 in

specifications
contact

6F, HKUST SZ IER Building, No.9, Yuexing 1st Rd., South District, Hi-Tech Park, Shenzhen, 518057, Guangdong, China
Tel +86-755-26656677 Sales ext 201、202、203
Fax +86-755-83067370

Service hotline +86-755-22673777
Sales：sales@dji-innovations.com
Company： info@dji-innovations.com

Find out all the ways you can get support and service for you DJI products
    ◎The quickest way is to contact the local dealer where you purchase your products.
    ◎ If you cannot find your answers to your questions from your dealer, please feel free to contact us. Our technical support mailbox is support@dji-innovations.com , We will reply you within 1-3 working days due to the large amount of emails. Our working time is from Monday to Friday , 9:00AM to 18:00PM (HongKong Time GMT+8:00)
    ◎ If you contact us beyond our normal business hours, your reply might be delay.
    ◎ Please make sure you provide the information of products, dealer and problems when you send email to us.

Please contact your local dealer to purchase Naza or Naza F450 Kit.

DISTRIBUTORS

PLEASE CONTACT US FOR DEALERSHIP PROGRAM